$449.00 msrp.

mmf 2.2

The music hall mmf 2.2 turntable is a two speed belt driven audiophile turntable at a budget price. The construction of the mmf 2.2 has been simplified to focus on the critical music making components; the main bearing, motor, and arm. It is constructed using high quality components and comes complete with the cartridge mounted.

gorgeous high gloss piano black lacquer finish
special vibration damping feet
one piece alloy tonearm for superb tracking ability
low noise fully manual belt drive design
high precision stainless steel and bronze bearing assembly
bearing provides ultra quiet fluid operation
separately isolated asynchronous motor
two speed (33/45 rpm) pulley
music hall tracker moving magnet phono cartridge
user replaceable elliptical stylus
cartridge is mounted and properly aligned
alloy platter and felt mat
excellent instruction manual
quick and easy to assemble
high quality gold rca connectors
dust cover and 45rpm adaptor

w17 x d13 x h4.5 in.
20 lbs. pkg.

$499.00 msrp.

mmf 2.2le

The music hall mmf 2.2 limited edition turntable is a two speed belt driven audiophile turntable with special ferrari red plinth at a budget price. The construction of the mmf 2.2le has been simplified to focus on the critical music making components; the bearing, motor, and arm. It is constructed using high quality components and comes complete with the cartridge mounted.

gorgeous ferrari red finish
special vibration damping feet
one piece alloy tonearm for superb tracking ability
low noise fully manual belt drive design
high precision stainless steel and bronze bearing assembly
bearing provides ultra quiet fluid operation
separately isolated asynchronous motor
two speed (33/45 rpm) pulley
music hall tracker moving magnet phono cartridge
user replaceable elliptical stylus
cartridge is mounted and properly aligned
alloy platter and felt mat
excellent instruction manual
quick and easy to assemble
high quality gold rca connectors
dust cover and 45rpm adaptor

w17 x d13 x h4.5 in.
20 lbs. pkg.

$875.00 msrp.

mmf 5.1

The music hall mmf 5.1 turntable is a two speed belt driven audiophile turntable employing the unique dual plinth construction originated by music hall. The distinctive design isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the motor, switch, wiring, and feet which are mounted on the bottom platform. Viso elastic cones separate the two platforms and provide vibration damping.

gorgeous high gloss piano black lacquer finish
top tier one piece alloy tonearm
flexible internal tonearm wire drawn from high purity copper
resonance damping counterweight is decoupled from the tonearm
two speed (33/45 rpm) pulley
goldring GL 2200 moving magnet phono cartridge mounted & aligned
precision stainless steel main bearing sheathed in teflon
main bearing provides noise free fluid operation
dynamically balanced alloy platter
soft felt mat and screw on record clamp
high quality gold rca connectors and detachable phono cable
special vibration damping adjustable feet and round spirit level

w18.25 x d13.25 x h5.5 in.
24 lbs. pkg.

$1095.00 msrp.

mmf 5.1se

The music hall mmf 5.1 special edition is a significant upgrade over the standard mmf 5.1. The special edition includes upgrades to the following critical components; vibration damping system, cartridge, and plinth. The mmf 5.1se like the mmf 5.1 is a two speed belt driven audiophile turntable employing music hall’s unique dual plinth construction. The distinctive design isolates the key sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the motor, switch, wiring, and feet which are mounted on the bottom platform. Sorbothane orbs separate the two platforms and provide vibration damping. The mmf 5.1se comes complete with cartridge mounted.

music hall’s unique dual plinth construction
rosenut real wood veneer top plinth
classic look sophisticated design
sorbothane isolation orbs
top tier one piece alloy tonearm
flexible internal tonearm wire drawn from high purity copper
counterweight’s center of gravity is level with the stylus tip
resonance damping counterweight is decoupled from the tonearm
separately isolated asynchronous motor
two speed (33/45 rpm) pulley
goldring GL 2400 moving magnet phono cartridge
user replaceable vital diamond stylus
supplied cartridge is properly aligned and mounted
precision stainless steel main bearing sheathed in teflon
main bearing provides noise free fluid operation
dynamically balanced alloy platter
soft felt mat and screw on record clamp
high quality gold rca connectors with detachable phono cable
special vibration damping adjustable feet and round spirit level
low noise fully manual belt drive design
excellent instruction manual and easy assembly
dust cover and 45rpm adaptor

w18.25 x d13.25 x h5.5 in.
24 lbs. pkg.

$1495.00 msrp.

mmf 7.1

The music hall mmf 7.1 turntable is a two speed belt driven audiophile turntable employing the unique dual plinth construction originated by music hall. The distinctive design isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the adjustable tip toe feet which are mounted on the bottom platform. Sorbothane hemispheres separate the two platforms and provide additional vibration damping. The motor, switch, and wiring are completely decoupled from the turntable and isolated on their own vibration damping puck. The mmf 7.1 comes in a high gloss piano black lacquer finish and is available with or without cartridge.

music hall’s unique dual plinth construction
carbon fiber tonearm
flexible internal tonearm wire drawn from high purity copper
counterweight’s center of gravity is level with the stylus tip
resonance damping counterweight is decoupled from the tonearm
completely isolated and decoupled ac motor
two speed (33/45 rpm) pulley
motor sits on its own resonance damping puck
front motor position eliminates motor to cartridge vibration
optional goldring GL 2400 moving magnet cartridge
user replaceable vital diamond stylus
cartridge is mounted and properly aligned
precision stainless steel main bearing sheathed in teflon
main bearing provides noise free fluid operation
non resonant acrylic platter
metal screw on record clamp and soft felt mat
high quality gold rca connectors with detachable phono cable
adjustable tip toe feet with anti scratch cups
low noise fully manual belt drive design
dust cover, 45rpm adaptor, and spirit level
excellent instruction manual and easy assembly

w18.25 x d13.25 x h5.5 in.
27 lbs. pkg.

$2195.00 msrp.

mmf 9.1

The music hall mmf 9.1 turntable, our flagship, is a two speed belt driven audiophile turntable employing the unique triple plinth construction originated by music hall. The distinctive design isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the adjustable tip toe feet, electronic speed control, and wiring which are mounted on the bottom platform. Sorbothane hemispheres separate each of the three plinths and provide additional vibration damping. The motor and switch are isolated on their own vibration damping base and completely decoupled from the turntable. The mmf 9.1 comes in a high gloss piano black lacquer finish and is available with or without cartridge.

music hall’s unique triple plinth construction
one piece carbon fiber tonearm (project 9cc)
flexible internal wire drawn from high purity copper
counterweight’s center of gravity is level with the stylus tip
resonance damping counterweight is decoupled from the tonearm
completely isolated and decoupled 50Hz motor
push button electronic speed control changes (33/45 rpm)
motor sits on its own resonance damping puck
front motor position eliminates motor to cartridge vibration
optional goldring Eroica LX low output moving coil cartridge
retippable gyger II line contact stylus
cartridge is mounted and properly aligned
inverted ceramic main bearing for super quiet fluid operation
non resonant 1” thick acrylic platter
soft felt platter mat
high quality gold rca connectors with detachable phono cable
adjustable tip toe feet with anti scratch cups
low noise fully manual belt drive design
dust cover, 45rpm adaptor, and spirit level
excellent instruction manual and easy assembly

w18.25 x d13.25 x h7.25 in.
40 lbs. pkg.

$699.00 msrp.

a 25.2

Music Hall set out to prove that with attention to detail good design and careful hand assembly that a superior amplifier could be made at a reasonable price.The Music Hall 25.2 integrated amplifier is the realization of those objectives.It outperforms many integrated amplifiers in its price class and quite a few above.The 25.2 is the heart around which any system can be built and is the perfect conpanion to our 25.2 CD player and 25.2 tuner.These three components combined offer a remarkable live music experience that was previously unobtainable at this price.

50 watt/channel amplifier
high quality toroidal transformer• ti PGA 2311 digitally controlled analog volume control
specially designed low noise pre amp section
preamp out/subwoofer connection
4 analog inputs, 1 tape loop, 1 headphone output
heavy rigid chassis
gorgeous slim line system remote control
thick brushed aluminum fascia
easily readable and dimmable florescent display
detachable power cord

w17 x d14.5 x h3.5 in.
24 lbs. pkg.

$150.00 msrp.

pa1.2

The music hall phono amp is a perfect solution for attaching a turntable to today’s audio equipment. It is a low noise high quality phono pre amp that accepts both moving magnet and moving coil cartridges. The beautifully finished extruded aluminum box wards off the effects of stray magnetic fields and provides a safe quiet environment for the sensitive electronics it houses thus providing you with the best sound possible from your turntable.

gain mm/mc 40dB / 60 dB
input sensitivity mm/mc 5mV/1kHz / 0.45mV/1kHz
input impedance mm/mc 47Kohms/120pF / 100 ohms/120pF
output voltage typically mm/mc 300mV@1kHz – 3mV / 0.3mV
total harmonic distortion mm/mc <0.01 / <0.05%
riaa curve accuracy 20Hz-20kHz / 0.5dB
snr mm/mc -86dB / -68dB (-94dB / -75 dB A weighted)
output voltage 15V/300mA AC
external power supply
rigid extruded aluminum chassis

w4.2 x d6 x h2.1 in.
3 lbs. pkg.

$595.00 msrp.

dac 25.3

Today an increasing number of music lovers are buying storing and listening to music through their computer, media server, or personal music player (iPod). Many are also digitally distributing their music using a sonos, squeezebox, or one of a host of digital music distribution systems available on the market. This is a great way to explore and appreciate music but generally it’s done at the expense of sound quality. Until now music lovers have been forced to rely on the inferior digital to analog converters (DACs) and sounds cards contained in those devices. As a result, their musical enjoyment has dramatically suffered. We designed the dac 25.3 to directly address this problem and to significantly improve the sound quality of the music played on these systems.

By uniting a state of the art digital to analog converter with a tube output we produce the clarity and precision of a 24bit DAC with the warm rich open sound people love of tubes. The dac 25.3 has 4 digital inputs which can accept any coax (s/pdif), optical, XLR (AES/EBU), or USB digital input from an iPod transport, computer, media server, sonos, squeezebox, CD/DVD in stereo transport, or music hall’s own cd 25.3 compact disc player, and it will output two channel stereo analog.

The dac 25.3 features the latest texas instruments (formerly burr-brown) PCM 1796 24bit/192kHz, advanced segment, stereo audio digital to analog converter. This processor features 123dB dynamic range an 8 x oversampling digital filter and just 0.0005% thd. The dac 25.3 upsamples to either 96kHz or 192kHz which is user selectable on the front panel. To achieve the best sound we use an advanced asynchronous reclocking and anti jitter control system upstream of the PCM 1796 DAC. For this system we are using the philips 74HC574 in conjunction with the ti SRC4192 asynchronous sample rate converter whose master clock is a high precision active crystal oscillator. The dac 25.3 also features a large r-core high current oversize power transformer. A headphone output is provided for convenient personal listening.

electro-harmonix 6922 tube single-ended (rca) output
solid-state differential balanced output
ti PCM 1796 24bit/192kHz DAC
ti SRC 4192 asynchronous sample rate converter
high precision active crystal oscillator master clock
user selectable 96kHz or 192kHz upsampling
asynchronous reclocking and anti jitter control system
8 x oversampling digital filter
4 digital inputs: coax (s/pdif), optical, XLR (AES/EBU), or USB
2 gold plated outputs; single ended (RCA), balanced (XLR)
headphone output with adjustable analog volume control
large high current oversize r-core power transformer
thick brushed aluminum fascia and solid chassis
110v/220v voltage selectable transformer
detachable power cord

w8.5 x d13.5 x h3.75 in.
10 lbs. pkg.

$250.00 msrp.

vp 130

The vp 130 is a tube phono preamp with a built in headphone amplifier for use with moving magnet and high output moving coil cartridges. The vp 130 is designed to amplify an RIAA equalized phono signal to a hi level signal. Since the unit utilizes tube circuitry the resulting output signal is more warm and musical than solid state preamplifiers. The real kicker aside from the price and stellar sound is that it's manufactured in the US.

"The Bellari seemed to create a sound that was rich natural and appealing. Surface noise was low, and the music emerged from a crisp quiet background. It was an excellent sound by almost any standards; one I was very happy to listen to. The bane of cheap vinyl reproduction is excessive brightness/harshness. The Bellari sounded focussed and articulate, but rich and warm too - with an attractively full bass and sweet open mid-band." --

-Jimmy Hughes, Hi-Fi + Issue 37

RIAA equalization
all tube circuitry
switchable Rumble Filter
mute switch
headphone output w/variable level control
steel chassis
input sensitivity: 30 dB gain
input impedance: 50k Ohms
output impedance: 8 Ohms headphone, 100 Ohms rca
max output level: >10dB @ 1kHz at .1% dist.
equalization: RIAA +/- 1.5 dB, 20Hz to 20kHz
rumble filter: 20Hz
thd .02% @ 1KHz
s/n ratio: >80 dB unweighted
pwr: 12 - 18 VDC
indicator: 1 power LED

w6 x h2.5 x d5.4 in.
3 lbs. pkg.

Please call or email for priceing.

mt 502

The MT502 is a Moving Coil transformer that raises the low level of a Moving Coil Cartridge up to a Moving Magnet level. Making your Moving Coil cartridge compatible with a Moving Magnet Phono preamp. The MT502 is all hand built in the USA with 100% USA made parts right down to its custom hand wound transformers and custom made chassis. The MT502 is as much art as it is audiophile performance. We designed the MT502 with a no compromise mentality utilizing only the best components. With its 24K gold plated jacks and transformers, military grade double sided glass circuit board, extra heavy gauge steel chassis and powder coated red finish. The MT502 truly makes a statement in audio perfection.

I/O Connectors: RCA
Input Impedance: 50-100ohms
Output Impedance: 50Kohms
Weight: 2lbs

$399.00 msrp.

vp 530

The vp 530 is a usb/tube phono preamp for use with moving magnet and high output moving coil cartridges. It includes a built in headphone amplifier, burr-brown analog to digial (A2D) converter with usb output, and RIAA curve/flat EQ. The vp 530 is designed to amplify an RIAA equalized phono signal to a hi level signal or provide a usb digital output. Since the unit utilizes tube circuitry the resulting output signal is more warm and musical than solid state preamplifiers. The real kicker aside from the price and stellar sound is that it's manufactured in the USA.

RIAA/flat equalization
all tube circuitry
switchable rumble filter
mute switch
headphone output w/variable level control
steel chassis
i/o connectors: rca, 1/4" trs stereo, mini USB
input sensitivity: 30 dB gain @ 1kHz, 47k ohms
input impedance: 50k ohms
output impedance: 8 ohms Headphone, 100 ohms rca
max output level: >10dB @ 1kHz at at .1% dist.
equalization: RIAA +/- 1.5 dB, 20Hz to 20kHz
burr-brown PCM 2901EG, 16 bit 44.1khz
rumble filter: 20Hz
thd: .02% @ 1KHz
s/n ratio: >80 dB unweighted
pwr: psu115 15 v dc 700Ma
indicator: 1 power LED

w6 x h2.5 x d5.4 in.
3 lbs. pkg.